Packet Tracer 7.2.4.2 Configure RIPv2

In this packet tracer i was able to finally apply RIPv2. It is as you may already know a enhanced version of RIP that carries the subnet masks in its routing updates for routers. However we still need to configure in order to stop it fro sending updates for discontiguous subnets. Since that is its default function i had to use the no auto-summary command in order to stop it from automatically summarizing routes. To start off the lab i first analyze the protocols being used for the router, and notice that RIP is being used. AS a result, i quickly change to RIPv2 for all three routers. After that i would then used the clear ip route *  in order for the router to reconstruct its routing table in order for it to properly implement RIPv2. As soon as that was done all that was left was to stop the current newly placed routing protocol from sending automatic updates to the improper places. A mentioned before i would just use the no auto-summary and    resulting in a properly functioning RIPv2.