Friday, March 2, 2012

Packet Tracer 1.3.5.2 Routing Table Principles

in this packet tracer i was able to learn about the routing table and more things about it. i start with a ping from the desktop of PC3 which results in it being in it being unsuccessful. so i troubleshoot this problem further by going into the CLI to configure an address. once i configure i try the ping again only for it to fail because of the request timing out. so i know had to look for another way of fixing the routing issue in R3. so what i did was by viewing the ping from PC1 to PC3 in simulation mode i could see the problem from a different perspective. so i filter the traffic so that only the ICMP packets is shown. i then add a simple PDU and click on PC1. this will recognize PC1 as the source of traffic, and then press PC3 as the destination host. this completely trouble shoots the problem that was associated with the ping and traveling of the packet.

No comments:

Post a Comment